 |

ROHO® DRY FLOATATION technology is achieved
in ROHO's products through air-fluid, interconnected cells.
By using this product design, our cushions and mattresses can
mimic the properties of water by evenly distributing interface
pressures across the cushioning surface and away from peak pressure
areas which are most at-risk for developing ischemic ulcers
(pressure sores).
This technology has proven effective for healing and prevention
of ischemic ulcers and the positioning and stability needed
by wheelchair users, and added comfort for extended sitting
times.
The inventor, Robert H. Graebe, chose to use air as the fluid
instead of water because of the weight and potential problems
water could cause. Water is affected by gravity, difficult
to adjust, hard to regulate by temperature, and requires lengthy
set-up and take down times.
Foams and gels don't posses all of the same properties as
air and thus are inadequate at providing appropriate pressure
distribution without tissue deformation. Foams compress with
time, becoming virtually useless, and gels tend to be heavy,
coagulate with time, and become softer when hot and harder
when cold, due to changes in density from temperature exposure.
The four principles of DRY FLOATATION technology
 |
|
Six Degrees of Freedom
ROHO cushions are constructed of individual cells that
move independently, allowing each cell to twist, turn,
bend and adapt precisely to the contours and anatomy
of the patient.
|
 |
|
Low Surface Tension
The unique cellular design allows for immersion into
the cushion without deforming tissue, minimizing the
chance of skin breakdown.
|
 |
|
Constant Restoring Forces
When a patient is immersed in a ROHO DRY FLOATATION
product, the forces and pressures pushing back are kept
equal at all points. As the body is immersed, greater
contact area is achieved for dispersion of pressure.
Thus, the pressure on any one area is minimized.
|
 |
|
Low Friction and Shear
As a result of the three previous principles, DRY FLOATATION
technology provides a low friction and low shear environment.
Friction acts to oppose the direction of motion, or
impending motion. Shearing occurs when opposite, but
parallel, forces meet and the outcome inhibits blood
flow. The slick surface of the ROHO cells combined with
the independent movement of each cell greatly reduces
friction and shear as clients move.
|
Consider the following example:
We all live in an atmosphere where the pressure around us
(ambient) is 760 mmHg, or 14.7 psi. Commercial divers spend
up to eight hours at several atmospheres of pressure (we'll
use 3 as an example), which would approximate 2280 mmHg, or
44.1 psi. This shows that divers can experience unrelieved
interface pressures greater than 32 mmHg for long, uninterrupted
periods. This is because of the environment the diver is in,
where immersion in water is distributing these pressures so
that tissue damage does not occur. ROHO DRY FLOATATION technology
works using this exact principle. The immersion depth for
DRY FLOATATION cushions is adjustable to provide the lowest
possible pressures applied to the individual being supported.
The external pressure magnitudes produced by DRY FLOATATION
technology range from 20 mmHg to 50 mmHg for emaciated persons,
depending on the mass supported versus the contact area available
(bed lying to chair sitting). hus, DRY FLOATATION cushioning
produces external skin pressures which are less (pressure
relief) than the level of flow cessation from external pressures
for normal blood pressures and in a range which is compatible
to facilitate healing.
|